Alpha Air/Exhaust Hose Adapter for Stone Grinding Tools
Pickup currently unavailable at Dynamic Stone Tools Warehouse (Manassas Park, VA)
Description
Description
Alpha® Air / Exhaust Hose Adapter (HEP110021)
The HEP110021 Air / Exhaust Hose Adapter is a small polymer fitting that bridges the dust port on Alpha® Ecoguard CX, GX and W Series dust collection covers and the connector / vacuum hose. The adapter is included with most Ecoguard kits (ECOCX5KIT, ECOW6KIT, ECOW9KIT) and is available as a stand-alone replacement when building a custom dust-extraction system. Made in the USA.
Features
- Connects Ecoguard CX, GX and W Series dust covers to standard vacuum hoses
- Replacement / standalone version of the adapter included in Ecoguard kits
- Lightweight polymer construction — will not rust or corrode
- Designed for jobsite use with HEPA wet/dry vacuums
- Made in the USA
| Part No. | Description | Material | Country of Origin | UPC |
|---|---|---|---|---|
| HEP110021 | Air / Exhaust Hose Adapter for Ecoguard dust covers | Polymer | USA | 749173600180 |
- Fit the adapter to the dust port on your Ecoguard cutting or grinding cover.
- Push the matching cuff of a connector hose (e.g. 500026 18", 500073 54") or your vacuum hose onto the other end.
- Verify the joint is secure with no visible gap — a tight seal is required for >90% dust capture.
- Start the vacuum first, then start the grinder. Vent freely while running.
- Inspect the adapter at the end of every shift; replace if cracked or worn.
Air / Exhaust Hose Adapter — HEP110021
| Part No. | HEP110021 |
| UPC | 749173600180 |
| Type | Air / Exhaust Hose Adapter |
| Recommended For | Connects Ecoguard CX, GX and W Series dust covers to standard vacuum hoses |
| Packaged Weight | 0.10 lbs |
| Package Dimensions | 3" x 2.25" x 3" |
| Commodity Code | 3917.40.0090 |
| Country of Origin | USA |
| Property | Detail |
|---|---|
| Application | Hose adapter for Alpha Ecoguard dust collection covers |
| Compatible Covers | Ecoguard CX-5, GX Series, W6, W9 |
| Included In Kits | ECOCX5KIT, ECOW6KIT, ECOW9KIT |
| Material | Polymer |
| Country of Origin | USA |
Which Ecoguard products is this adapter for?
The Ecoguard CX-5 cutting cover, the GX Series grinding covers, and the W6 and W9 wide-kerf covers.
Is the adapter included with the dust covers?
It is included with the kits (ECOCX5KIT, ECOW6KIT, ECOW9KIT). The standalone covers and the connector hoses do not include it — order HEP110021 separately if you need it.
Does it fit standard shop-vacuum hoses?
Yes. The adapter is sized to mate with standard 1-1/4" / 2-1/4" vacuum hose cuffs used by most HEPA wet/dry vacuums.
What is the adapter made of?
Lightweight polymer that will not rust or corrode in wet-cut conditions.
No product-specific videos are currently available from the manufacturer or DST.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.
