Alpha CNC Core Bits for Porcelain & Sintered Slabs 1-1/4" - 1/2" Gas Thread
- Wet Core Drill Bit Designed for CNC Machines and Radial Arm Workstations
- Designed for Dekton®, Crystallized Glass and Other Vitreous Materials
- Comes with A 1/2” Gas Thread for Tool Holders
- Diamonds and Matrix Minimize Blow-Out
- Utilizes The Superior Technology
Alpha CNC Core Bits for Porcelain & Sintered Slabs
Alpha® introduces a Wet Core Drill Bit for CNC Machines and Radial Arm workstations for cutting Porcelain and Sintered Slabs, Dekton®, Neolith®, Crystallized Glass and other vitreous materials. This Core Bit comes with a 1/2” Gas Thread, designed for the tool holder. The diamonds and matrix have been selected to minimize blow-out at the bottom of the stone, since most CNC Router fabrication is done upside-down. This new Core Bit utilizes the superior technology that has made the Alpha® Wet and Dry Core Bits the best in the industry.
Recommended Working Parameters: DND01250/DND01375
Maximum RPM: 4,000
Traverse Speed: 1-1/4" (30mm)/Min.
Traverse Exit Speed: 5/8"(15mm)/Min.
Based on 3/4"(2cm) thick materials.
Recommended For: Porcelain/Sintered Slabs, Dekton®, Neolith®
Threads: 1/2" Gas Thread
Specifications
| Brand | ALPHA® |
| Package Dimensions | 6.25" x 1.5" x 1.5" |